TEW-730APO

 TRENDnet’s 9 dBi Outdoor PoE Access Point, model TEW-730APO, provides wireless N300 (2.4 GHz) building-to-building connectivity. It supports Fat AP, Thin AP, Virtual Access Control (controls compatible Thin AP devices), and Virtual AC + Thin AP modes. Fat AP mode supports a variety of installation scenarios with Access Point (AP), WDS Bridge, WDS Repeater, Client, and CPE + AP modes. The rugged IP55 rated TEW-730APO comes with a proprietary PoE injector and a pole mounting kit.

Building-to-Building An integrated 9 dBi directional antenna, WiFi N300, and an included PoE injector facilitate building-to-building networking.	Installation Flexibility A variety of installation scenarios are supported with Access Point (AP), WDS Bridge, WDS Repeater, Client, and CPE + AP modes.	Outdoor Ready Built for protected outdoor locations with an IP55 weather rating and an operating temperature range of -20 – 70 °C (-4 – 158 °F).

	Multi-Mode Support Supports Fat AP, Thin AP, Virtual Access Control (controls compatible Thin AP devices), and Virtual AC + Thin AP modes
	Fat AP Mode Fat AP mode supports a variety of installation scenarios with Access Point (AP), WDS Bridge, WDS Repeater, Client, and CPE + AP modes
	Thin AP Mode Thin AP mode supports management of the TEW-730APO by another device (such as another TEW-730APO set to Virtual Access Control) and Thin AP supports Access Point (AP) mode
	Virtual Access Control (AC) Mode Virtual Access Control mode manages other compatible access points set to Thin AP
	Wireless N300 (2.4 GHz) Compliant with 802.11n/g/b technology (2.4 GHz spectrum) with data rates up to 300 Mbps
	Directional Antenna Built in 9 dBi directional antenna
	Outdoor Rated Durable enclosure with an IP55 outdoor weather rating
	Power over Ethernet (PoE) Comes with a PoE injector (non-802.3af compliant)
	Logs Real time logs and statistics help trouble shooting
	Encrypted Wireless Support for wireless encryption of up to WPA2
	Compatibility Compatible with 2.4 GHz legacy wireless devices
	Mounting Hardware Pole mounting hardware included

• Standards

• IEEE 802.3

• IEEE 802.3u

• IEEE 802.1d

• IEEE 802.1p

• IEEE 802.1Q

• IEEE 802.1X

• IEEE 802.11f

• IEEE 802.11b

• IEEE 802.11g

• IEEE 802.11n (up to 300 Mbps)

• Hardware Interface

• 1 x 10/100 Mbps (proprietary PoE) port**

• Reset button

• LED indicators

• Grounding point

• Special Features

• IP55 weather rated

• 802.1Q VLAN assignment per SSID

• Access Control

• Wireless encryption: WEP, WPA/WPA2-PSK, WPA/WPA2-RADIUS

• Firewall (CPE Mode): NAT, Port Forwarding, DMZ Host

• Access Controls: MAC, IP Filter, Port Filter, Per-SSID client limiting

• 802.1Q VLAN

• QoS

• WMM

• Traffic Shaping

• Operation Modes

• Fat AP

• Thin AP

• Virtual AC

• Virtual AC + Thin AP

• FAT AP Modes

• Access Point (AP)

• Client (Client + AP)

• CPE (Client + Bridge)

• WDS Bridge

• WDS Repeater

• SSID

• Up to 8 SSIDs

• Internet Connection Types (CPE mode)

• Dynamic IP (DHCP)

• Static IP (Fixed)

• PPPoE (Dynamic IP)

• Management/Monitoring

• Local/remote web based management (HTTP, HTTPS)

• Local/remote CLI based management (Telnet, SSH)

• SNMP v2/v3

• CPE Management

• Upgrade firmware

• Backup/restore configuration

• Event logging

• Syslog

• Reboot

• Restore to factory defaults

• Ping test

• Ping Watchdog

• Trace Route

• STP

• STP forward delay

• Traffic Shaping

• MAC based access control

• Frequency

• FCC: 2.412 – 2.462 GHz

• ETSI: 2.412 – 2.472 GHz

• Wireless Channels

• FCC: 1 – 11

• ETSI: 1 – 13

• Modulation

• 802.11b: DBPK, DQPSK, CCK with DSSS

• 802.11g/n: BPSK, QPSK, 16-QAM, 64-QAM with OFDM

• Antenna Gain

• 9 dBi internal directional antenna

• Wireless Output Power/Receiving Sensitivity

• 802.11b: FCC/ETSI: FCC: 24 dBm (max.), ETSI: 11 dBm (max.)/ -85 dBm (typical) @ 11 Mbps

• 802.11g: FCC/ETSI: FCC: 22 dBm (max.), ETSI: 11 dBm (max.)/ -70 dBm (typical) @ 54 Mbps

• 802.11n: FCC/ETSI: FCC: 20.5 dBm (max.), ETSI: 9 dBm (max.)/ -62 dBm (typical) @ 300 Mbps

• EIRP

• FCC: up to 33 dBm (with built in 9 dBi antenna)

• ETSI: up to 20 dBm (with built in 9 dBi antenna)

• Power

• Input: 100 – 220 V, 50 – 60 Hz, 0.6 A

• Output: 24 V / 1 A Consumption: 12 Watts Max.

• Operating Temperature

• -20 – 70° C (-4 – 158° F)

• Operating Humidity

• Max. 95 % non-condensing

• Certifications

• CE

• FCC

• Dimensions

• 205 x 64 x 61 mm (8.1 x 2.5 x 2.4 in.)

• Weight

• 0.8 kg (1.8 lbs.)

• Warranty

• 3 year limited